Collection: Herringbone LVT Flooring

Glue down herringbone LVT is luxury vinyl tile designed in a classic herringbone pattern that requires adhesive for installation. This creates a permanent, stable floor with excellent durability and a sophisticated appearance.

Use a pressure-sensitive acrylic adhesive specifically designed for LVT flooring. Always follow the manufacturer's recommendations for the best results and warranty compliance.

The subfloor must be clean, dry, level, and smooth. Remove all debris, fill any cracks or holes, and ensure the surface is completely flat. Any imperfections will show through the vinyl.

It depends on the existing floor. You can install over some hard surfaces if they're smooth and level, but it's best to remove old flooring. Never install over carpet or cushioned vinyl.

Most LVT adhesives have an open time of 20-30 minutes and require 24-48 hours to fully cure. Avoid heavy traffic during this period to ensure proper bonding.

Yes, most glue down LVT is compatible with underfloor heating systems. Ensure the temperature doesn't exceed the manufacturer's maximum recommendation, typically 27°C.

Regular sweeping or vacuuming and damp mopping with a pH-neutral cleaner is sufficient. Avoid harsh chemicals, abrasive cleaners, and excessive water. Use protective pads under furniture.

The herringbone pattern creates visual interest, makes rooms appear larger, and adds a timeless, elegant aesthetic. It also helps disguise minor subfloor imperfections better than straight-lay patterns.