Pearl Oak – 0.55mm Wear Layer

• Ensure the subfloor is clean, dry, smooth, level and free from dust or debris before installation.
• Allow the flooring to acclimatise in the room before fitting.
• Pearl Oak is a glue-down LVT and should be fully bonded to the prepared subfloor using a suitable LVT/acrylic flooring adhesive. The product assessment allows installation with acrylic adhesive.
• Plan the plank layout before applying adhesive to minimise small cuts and achieve a balanced finish.
• Apply adhesive according to the adhesive manufacturer's instructions, including the correct coverage and open time.
• Lay each plank firmly into the adhesive and keep joints tightly fitted.
• Roll the completed floor with a suitable flooring roller to ensure good adhesive transfer.
• Allow the adhesive to fully cure before heavy foot traffic, moving furniture or wet cleaning.

Care Guide

• Sweep or vacuum regularly to remove grit and loose dirt.
• Clean using a damp mop and a neutral cleaner suitable for LVT/vinyl flooring.
• Wipe up spills promptly.
• Avoid abrasive cleaners, scouring pads, bleach and harsh solvents.
• Do not flood the floor or leave standing water on the surface.
• Use felt pads beneath furniture legs and protective mats beneath heavy or frequently moved furniture.
• Lift heavy furniture rather than dragging it across the floor.
• Use entrance mats to reduce dirt, grit and moisture being walked onto the flooring.
• Avoid rubber-backed mats where possible, as some rubber products can cause discolouration to vinyl flooring.
• The flooring has a matt UV-coated surface to help protect the decorative finish.