Specifications
Everything you need to know- Tile size: 304.8 mm × 609.6 mm
- Pack quantity: 20 tiles
- Pack coverage: 3.72 m² per pack
- Overall thickness: 2 mm
- Wear layer thickness: 0.30 mm
- Finish: Matt
- Surface treatment: UV coating
- Colour and design: White marble effect with grey veining
- UV protection: Yes
- Water resistance: Waterproof
- Slip resistance rating: R9
- Installation type: Glue-down luxury vinyl tile
- Underfloor heating compatible: Yes
- Suitable for: Domestic and light commercial use
Pre-order: Arctic Marble - Glue Down LVT
Enter the area you need to enable Add to Basket.
How to measure your room
- Measure the length and width of the room in metres.
- Multiply length × width to get the area in m².
- For irregular rooms, split into rectangles, measure each, then add them together.
- Tick "extra for cuts & waste" above if you'd like us to round up automatically — most fitters recommend an extra 10% to cover cuts and offcuts.
How much do you need?
Enter your area or choose the number of packs.
Need help measuring?
Measure in metres:
- Measure the room length and width.
- Multiply length × width to get m².
- For L-shaped rooms, split the space into rectangles and add the areas together.
- Enter the total above. Use the 10% option for extra cuts and wastage.
Example: 4m × 3m = 12m²
Excludes weekends and bank holidays.
Couldn't load pickup availability
Share
Product information
Everything you need before ordering and fitting.
Arctic Marble is white marble effect flooring with soft grey veining and a matt finish. Its fresh, timeless design brings a bright, elegant feel to your space. Each tile is 2mm thick with a 0.3mm wear layer. Dispatch 23rd October.
Installation
This flooring must be installed using the glue-down method on a smooth, dry, clean, and level subfloor. The subfloor should be free from dust, grease, and moisture before installation. A suitable LVT adhesive must be used, following the adhesive manufacturer’s instructions. For best results, professional installation is recommended.
This product is compatible with underfloor heating, provided surface temperatures do not exceed 27°C and the heating system is brought up to temperature gradually after installation.
Care & Maintenance
To keep your floor looking its best:
- Sweep or vacuum regularly to remove dirt and grit
- Clean using a pH-neutral vinyl floor cleaner
- Wipe up spills promptly to prevent staining
Avoid:
- Steam cleaners
- Abrasive pads or harsh chemicals
- Wax, polish, or oil-based cleaners
With proper care, LVT will maintain its appearance and performance for many years.
What does Arctic Marble flooring look like?
Arctic Marble features a white marble-effect design with soft grey veining, creating a bright, timeless look that complements modern and traditional interiors.
What size are the Arctic Marble tiles?
Each tile measures 304.8 mm × 609.6 mm, equivalent to 12 × 24 inches.
How much flooring is included in each pack?
Each pack contains 20 tiles and covers approximately 3.72 m².
How thick is Arctic Marble flooring?
Arctic Marble has an overall thickness of 2 mm and a 0.30 mm wear layer.
What finish does Arctic Marble have?
Arctic Marble has a matt finish and a UV surface coating.
How do I calculate how many packs I need?
Measure your floor area in square metres and allow extra for cuts and wastage. Divide your total required area by the coverage per pack, then round up to the next whole pack.
